Windows and doors installation problems are not common because most homeowners prefer working with reputable professionals such as Total Home Windows and Doors. But, when they occur, they are enough to give you a horrible experience. Most people will describe it as a nightmare.
Minor problems are easy to fix, but the nightmares cost you a fortune. Usually, they happen because of the poor quality products used for your windows and doors and relying on installers without relevant qualifications. Here are some of the worst:
1. Water Leaking
It usually happens during rainy periods and when the snow is melting. It is called water leaking because water enters your home even when you have closed your windows. The water that gets through the window is enough to soak your interior items. It can cause a lot of damage and even electrocution when it gets into contact with your electricity.
When you notice this problem, check your caulking if you are a DIYer. If not, ask a reputable professional to come and check it for you. This problem can be fixed by replacing your windows exterior.
2. Windy Windows and doors
When you hear about windy window and door units, it does not mean the windows are causing wind. Instead, it means that they are allowing draft to pass. In this case, windows are often closed, but you feel cold in the house. If you use curtains on them, you can notice some movement.
Check whether the weather stripping is loose. Also, check how your window design has been installed. These are the two major causes of drafty windows. If the problem is with the weather stripping, have it tightened. If the window design has the problem, have it re-installed.
3. Falling Out of the Whole Window
It is rare to occur, but it can cause injuries, especially when someone is near the place it falls. Windows fall from the outside, and other than causing injuries, they cause loss. Due to the falling impact, the window breaks, leaving you to have to purchase another one for replacement.
When a whole window falls, it is because it was not adequately caulked. It becomes loose and with time fall off. If you realize your window has started getting loose, do not wait for it to fall. Instead, work on it as soon as you can.
4. Poorly Attached Glass Panel
This problem is majorly caused by poor manufacturing of the windows and doors. Sometimes, your window installer can contribute to this challenge. The glass panel is made loose, and if you are keen, you will notice some slight shaking of the panel when operating your window.
A poorly attached glass panel comes off after application of pressure on the window. It shatters the glass everywhere, which can cause cuts when stepped on. To prevent it from happening, check your window panes when buying. Also, check them after installation to make sure you are not left to deal with poorly attached glass panels.
5. Tips for Dealing with the Window Installation Nightmares
How you get rid of the window installation nightmare begins at the installation point. These tips will help you:
a. One-Stop Manufacturer
One of the most convenient ways of dealing with these challenges is by dealing with a manufacturer that offers window installation services. Although these are not common, they are ideal since you can reach out to them in case you get a product or installation problem.
b. Work with Reputable Professionals
These are window and door professionals with solid years of working experience and feedback from customers. They help you with everything you need for your window right from budget estimation to window installation. They are also happy to help you whenever you have a problem with the window they installed for you.
c. Get Quality Windows and doors
Do not be enticed by cheap window and door products without first looking whether their quality is superior or not. If other customers are complaining about it, look for a better product. If it does not have customer reviews, check whether it has a quality guarantee.
Do not let your window give you an uncomfortable home environment when you can prevent it.